Linear Low Bay / Area Hazardous Location Lighting

Full Metallic Body Area Hazardous Location Lighting

Full Non-Metallic Body Area Hazardous Location Lighting

Traditional Linear High Bay Hazardous Location Lighting

Round Multi-Purpose Hazardous Location Lighting

Square Multi-Purpose Hazardous Location Lighting

Jar Hazardous Location Lighting

Area / Parking Hazardous Location Lighting


Our LED linear industrial hazardous location lighting fixtures (rated Class I, Division 2) are designed specifically for highly hazardous areas where an explosion may occur due to the constant presents of airborne hazardous materials.

A few common applications for LED industrial hazardous location lighting include:

  • paint booths
  • petroleum refineries
  • gasoline storage
  • spray finishing
  • fuel servicing

One of the following three situations must exist in order for an area to be considered a Class I, Division 2 location:

  1. Volatile flammable liquids or flammable gases are handled, processed, or used, but the hazardous liquids, vapors or gases will normally be confined within closed containers or closed systems from which they can escape only in the event of accidental rupture or breakdown of such containers or systems, or as a result of abnormal operation of equipment.
  2. Ignitable concentrations of gases or vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operations of the ventilating equipment.
  3. Adjacent to a Class I, Division 1 location, and to which ignitable concentrations of gases or vapors might occasionally be communicated unless such communication is prevented by adequate positive-pressure ventilation from a source of clean air, and effective safeguards against ventilation failure are provided.